FC-DCOM-234/485 Honeywell Safety Manager Datasheet & Technical Manual

FC-DCOM-234/485 Honeywell Safety Manager Datasheet & Technical ManualHoneywell FC DCOM 234 485 Safety Manager Series The Honeywell FC DCOM 234 485 serves as the primary FC DCOM 234 485 Serial Communication Interface Module utilized to execute physical layer signal conversion across Honeywell Safety Manager platforms. Hardware Specifications Parameter Specification Model FC DCOM 234 485 Brand Honeywell Origin United States Weight 0. 66 kg Dimensions 110 mm x 70 mm x 61 mm Operating Temp 10 to +60 deg C Power Consumption

These features allow the controller to compensate for varying load conditions instantly

Superior Noise Immunity: The module employs optical and magnetic coupling to isolate the bus from field circuitry

High-Speed Inputs: 8 Interrupt-capable channels for microsecond-level response

Buffered Transducer Outputs: Coaxial connectors

allowing engineers to mix different voltage ranges—such as ±10V and 0–5V—on the same physical module

Are these units refurbished or new

The local backplane architecture does not support Removal and Insertion Under Power (RIUP)

White: CAN_H

Does the module require external fusing

Dimensions: 55 x 80 x 118 mm

Status reporting is communicated directly to the master controller via the Slave Expander Bus (SEB)

Align the PW482-11 with the baseplate guide rails and insert the unit until the rear backplane connectors are fully seated