UNC No. 10 x 24 BAER HSSG Hand Tap Set (3pcs.)

UNC No. 10 x 24 BAER HSSG Hand Tap Set (3pcs.)BAER HSSG Hand Tap Set (3pcs.) UNC No. 10 x 24 The hand tap set consists of three taps and allows you to cut a finished thread with significantly reduced risk of breakage. The advantage of three piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with one ring) removes 65 per cent of the thread profile and the intermediate tap (No. 2) (marked with two rings) removes 85 per cent. Pre cutting and

The set is suitable for the following materials: for easily machinable materials up to 900 N/mm²

BaerFix Thread Repair Kit UNF 5/16 x 24

BaerCoil Instruction for use

5 times 6 mm=9 mm

BaerCoil instruction for use Technical data - metric BaerCoil wire thread inserts DIN 8140 Drill Sizes Technical Information

2161 G-AlSi8Cu3 3

With this BaerCoil® thread repair set it is possible to repair through hole threads and blind-hole threads in M 15 x 2

5 mm L1 45 mm L2 14 mm Diameter No

BaerCoil Thread Repair Kit M 9 x 1

The nominal diameter for MF 20 is 20 mm

Cast iron (Brinelhardness below 150 HB): 15

1 x B3017-1: BaerCoil HSSG single-cut tap M 10 x 1