Tapping chucks for synchronisation BT 40 - M3-M20 - 89 | ER 25

Tapping chucks for synchronisation BT 40 - M3-M20 - 89 | ER 25Application: For machining centres with synchronous spindle. Note: Synchro tapping chucks compensate synchronisation errors. Minimal length compensation on compression and expansion balances very small pitch differences between synchro spindle and tap, which can cause high frictional forces on the thread flanks. A possible increase of axial force during the tapping process is reduced to a minimum. Suitable for internal coolant. Coolant pressure up to

A possible increase of axial force during the tapping process is reduced to a minimum

Upon switching on the display will read the actual absolute measuring position

SK 30 without coolant exit bores on the end faceDelivery:

00005" / 0

Collets sealed with seal for IC DIN 6499 B (ISO 15488 B) ER-system

The chucking diameter is configured for a tool tolerance of h6

bei Ø 6 – Ø 32 mm = h238

which can cause high frictional forces on the thread flanks

For the manufacturing of special tools

Application:

Sealing capacity up to 80 bar

Instructions for use