M10 x 1.25 BaerCoil Bottoming Tap (Helicoil Type)

M10 x 1.25 BaerCoil Bottoming Tap (Helicoil Type)BaerCoil HSSG Short Machine Tap M 10 x 1. 25 STI (oversized for wire thread inserts) BaerCoil screw tap are mainly used for thread repair or thread reinforcement in connection with wire thread inserts. With this BaerCoil short machine tap, a finished thread with oversize can be cut in one operation as a holding thread for wire thread inserts of dimension MF 10 x 1. 25. Precise internal thread can thus be cut time savingly by hand or semi

Diameter 7 Length 1

10 mm P (depth) The thread insert must sit 1/4 - 1/2 turns below the surface B (thread depth with chamfer) 43

BaerCoil Wire Thread Inserts M 10 x 1

With this BaerCoil® thread repair set it is possible to repair through hole threads and blind-hole threads in M 11 x 1

5 x B7241-15: BaerCoil thread inserts M 20 x 1

Diameter 10 Length 2

For repair directly on the thread

according to the required length

Diameter 13 Pitch 1

The nominal diameter for UNF 1/2 is approx

BaerCoil® thread inserts help to save carrier material and to use smaller or shorter screw connections

5 x B8237-15: BaerCoil thread inserts UNF 1" x 12 - Length: 1